WB3GXW-R>Dead carrier timeout
WB3GXW>stuck on transmit
W3ICF>John W3ICF REP. BACK UP
KB3MXM>BRB
WB3GXW-R>Dead carrier timeout
KB3JQQ-L>we're ready
KB3JQQ-L>link is live
WB3KAS>Wanda has a phone conf to attend.
KB3JQQ-L>I just updated after polling the repeaters
WB3GXW>30 users connected
W3ICF>W3SMD-L WITH KICK BACK JOHN
KB3JQQ-L>W3SMD-L is bouncing
KB3MXM>OK
KB3MXM>W3SMD usually in listen mode
K3TEL>RX ONLY, MIKE
W3SMD-L>sounding good on 223 marty
KB3MXM>W3SMD - QSL es TU
KB3JQQ-L>L'Shana Tova
WB2U>happy ny
K3TEL>GOOD YUNTOV
WB3GXW>I tested him for his license
WB3GXW>TIME OUT PENDING
WB3GXW>TIME OUT
WB3GXW>need rest ET
WB3GXW>okay good
KC3DSO>https://qsl.net/mdcasec
KC3DSO>MDC Winlink Monthly Check In NET Instructions
KB3NJK>WI3N  Jim are you APRS ready?
WI3N>Not APRS ready Pete
KC3DSO>Pete, you can hook up the D710 and use that
KC3DSO>from the Go Kit
AD3F>somehow I was disconnected. I'm online now.
W3ICF>
KB3MXM>go ahead Pete
KB3NJK>KC3DSO  Steven, I just need to be sure I have a sufficient amperage power point in my new truck.  I haven't installed a radio directly from B+ power
WB3GXW>TIME OUT PENDING
KC3DSO>Pete, just run the D710 at 10w. Very low power required.
AD3F>Extended RX Timeout
KB3JQQ-L>3820 is MEPN and the hospital net
W3YVQ>tu
KC3DSO>I have to go QRT. 73 all. Good conf call.
WI3N>Al, did you send Jim WB3KAS something yet for the SET to incorporate NTS?
AD3F>Extended RX Timeout
W3YVQ>r
AD3F>Extended RX Timeout
KB3MXM>TU ALL e 73
W3YVQ>wb3kas@aol.com
W3YVQ>Pass message to MDC Section Emergency Coordinator, WB3KAS at mdcsec@winlink.org One Message per Water Gauge Report
WB3GXW>TIME OUT PENDING